官方微信

SEARCH

Submit
Cancel

NEWS

Focus on Right, share the wonderful moments of enterprises and exhibitions, popularize product technical knowledge, and answer frequently asked questions

/
/
/
What is the service scope of the torque sensor?

What is the service scope of the torque sensor?

(Summary description)What is the service scope of the torque sensor? Torque sensors are measuring instruments that measure various torques, rotational speeds and mechanical power. Torque sensors have a wide range of applications and are mainly used in the following aspects.

What is the service scope of the torque sensor?

(Summary description)What is the service scope of the torque sensor? Torque sensors are measuring instruments that measure various torques, rotational speeds and mechanical power. Torque sensors have a wide range of applications and are mainly used in the following aspects.

Information

What is the service scope of the torque sensor? Torque sensors are measuring instruments that measure various torques, rotational speeds and mechanical power. Torque sensors have a wide range of applications and are mainly used in the following aspects.

1. Detection of output torque and power of rotating power equipment such as motors, engines, and internal combustion engines.

2. Torque and power detection of fans, pumps, gearboxes, and twist wrenches.

3. Torque and power inspection of railway locomotives, automobiles, tractors, aircraft, ships, and mining machinery.

4. It can be used for torque and power inspection of sewage treatment system.

5. It can be used in the manufacture of viscometers;

6. It can be used in craft industry and craft industry;

7. It can be applied to laboratories, testing departments, production monitoring and quality management.

What is the basic principle of torque sensor?

Torque measurement: Using strain gage electrical measurement technology, which forms a deformation bridge on the elastic axis. As shown in Figure 1

What are the product features of the torque sensor?

1. The signal output can arbitrarily select the waveform (square wave or pulse wave).

2. High detection accuracy, good stability and strong anti-interference.

3. No need to adjust 0 repeatedly. Continuously measure forward and reverse torque.

4. Can measure static torque or dynamic torque.

5. Small in size, the re-sensor can be used independently on the secondary instrument. According to the pin number of the socket, the power supply is 15V, -15V (200 mA), the impedance is proportional to the torque, and the square wave or pulse frequency signal can be output. Lightweight and easy to install.

6. Measuring range: 0-10000Nm standard option, non-standard 20,000 Nm, 30,000 Nm, 50,000 Nm, 80,000 Nm, 100,000 Nm, special range customization.

What are the precautions for torque sensors?

1. Do not work with electricity during installation, and do not directly knock or impact the sensor.

2. The fastening bolts on the coupling should be tightened, and a protective film should be placed on the outside of the coupling to prevent personal injury.

3. The output of the signal line cannot be output correctly, the power supply is short-circuited, and the shielding layer of the cable whose output current is below 10 mA is connected to the common end (power ground) of the 15V power supply.

The folded editor is installed using this paragraph

The use environment of torque sensor:

The torque sensor should be installed in an environment where the ambient temperature is 0~60, the relative humidity is lower than 90%, and it is non-flammable and explosive. It cannot be installed in a strong electromagnetic interference environment.

Scan the QR code to read on your phone

Related Reading

Follow us for more information

  • 官方微信 【 Official WeChat 】
  • 手机网站 【 Mobile Website 】
Username used for comment:
客户留言
Description:
Copyright © 2021 Changzhou Right Measurement and Control System Co., Ltd
www.300.cn